Docomo P-05C, Instruction Manual

Page: 22 / 176

20
Basic Operation
⿠
Ensure that you turn off and take hold of the FOMA terminal
when you install or remove the LUMIX Phone panel, UIM, or
battery pack.
⿠
You cannot use the UIM (blue) on your FOMA terminal. If
you have that blue one, have it replaced at a docomo Shop.
Charging
Charging Using AC Adapter
Cover
Release buttons
Connector
terminal
AC Adapter’s plug
Call/Charging indicator
Engraved
surface
Connector
Power
socket
AC Adapter
1
With the engraved surface of the
connector of the AC Adapter (option) face
up, plug the connector straight into the
connector terminal until it clicks.
⿠
To charge the battery, place the cover of the connector
terminal as illustrated. Pull out the cover of the connector
terminal to the direction A, and turn it to the direction B.
2
Pull out the AC Adapter’s plug, and plug
it into a household power socket of 100 V
AC.
3
When charging is completed, pull out the
connector from the connector terminal
while pressing the release buttons.
About UIM
The UIM is an IC card that holds your
information such as phone numbers.
You cannot use the FOMA terminal for
communications such as voice/videophone
calls, i-mode, or sending/receiving mail,
unless the UIM is inserted.