78
Vo
ice
/V
id
e
o
pho
ne
Cal
ls
/P
u
sh
Ta
lk
≥
You may be imposed punishment according to the law and rule (such as the
nuisance prevention ordinance) if you use the FOMA terminal to give a
remarkable nuisance and misdeed to the public.
Information
≥
When your FOMA terminal is used for the receiving end, an image through the caller’s
camera appears, and sound comes out. (You cannot switch to a substitute image.)
≥
Remote Monitoring does not start during Manner Mode and Public Mode (Drive
Mode). However, it starts even during Lock All.
≥
When Remote Monitoring is set to “ON” and a videophone call comes in from the
phone number set as “Other ID”, Remote Monitoring starts after the set ring time,
even when “Ring time”, “Auto answer setting”, or “Record message setting” is set and
regardless of their ring times.
≥
When Remote Monitoring is not performed, it is recorded in Received Calls as a
missed videophone call.
≥
If an earphone/microphone (option) is connected when a remote monitoring call
comes in, the ring tone sounds from both the earphone and the speaker, even when
“Headset usage setting” is set to “Headset only”.
≥
The ring tone for Remote Monitoring sounds. (You cannot change the ring tone for
Remote Monitoring.)
The ring tone sounds at the volume set for “Videophone” of “Ring volume”, but at
“Level 2” if you have set “Step”, “Level 1” or below. The color is “Gradation”, and its
lighting pattern is “Standard”, regardless of the Incoming Illumination setting.
≥
You cannot put incoming remote monitoring calls on answer-hold (On Hold).
≥
If you set both Call Forwarding Service and Remote Monitoring, and give priority to
Remote Monitoring, set its ring time shorter than that for Call Forwarding Service.
≥
To use Call Forwarding Service for Remote Monitoring, store the phone number of
dialing side as “Other ID” and set a 3G-324M videophone as the forwarding destination.
Please be considerate of the privacy of individuals around you
when shooting and sending photos using camera-equipped
mobile phones.
This service provides you a pleasurable group calls among multiple
parties (two to five persons including yourself). The participants can
speak by turns by pressing the PushTalk key.
※
You are charged a PushTalk communication fee each time you press the PushTalk
key (speak).
≥
For details on PushTalk or compatible models, refer to DOCOMO website or “Mobile
Phone User’s Guide [Network Services]”.
■
PushTalkPlus
※
This service enables you to have a PushTalk call with up to 20 persons including you.
You can use the shared Phonebook on the network, and can check the members for
their status, thus PushTalk becomes more useful.
※
You need to subscribe separately.
≥
For details such as how to operate, refer to the booklet which is supplied at
subscription.
1
Enter the other party’s phone number
1
p
When you are dialing, a confirmation tone for starting a
PushTalk call sounds for a few seconds, and then the
same ringback tone as the voice (videophone) call
sounds.
≥
You can make a group call to multiple persons using
the PushTalk Phonebook. (See page 82 and page 83)
PushTalk
Making a PushTalk Call
Summary of Contents for P-02A
Page 104: ...102...
