127
Securi
ty S
e
tt
in
gs
1
m
1
Set./Service
1
Lock/Security
1
Personal data lock
1
Enter your Terminal Security Code.
“
” appears and Personal Data Lock is set.
≥
To release Personal Data Lock, perform the same operation. When Timer Lock
ON At Close is set, the display for releasing Personal Data Lock appears also by
opening the FOMA terminal.
When you set “PIM/IC security mode” to “Face reader”, follow the operation of
“Use Face Reader to Release Lock” on page 130.
When you set to “Double security”, enter your Terminal Security Code after the
operation on the page 130.
When you select a function which cannot be used during Personal Data Lock, the
display for entering your Terminal Security Code appears depending on the function.
When you enter your Terminal Security Code, “
” is cleared and you can temporarily
use the function.
≥
When you show the Stand-by display while no menu function is activated, Personal
Data Lock is set again.
To temporally release Personal Data Lock
Information
≥
You can automatically receive Messages R/F, i-mode mail messages, chat mail
messages, and SMS messages during Personal Data Lock; however, the Receiving
or Reception Result display does not appear. Further, the receiving operation such as
ringing/vibration does not work, so you are not notified of receiving. The icons such as
“
”, “
”, or “
” appear after Personal Data Lock is released.
≥
During Personal Data Lock, some notification icons and desktop icons such as “New
mail”, “Missed alarm”, “Phone number”, “URL” and “Mail address” do not appear,
however, they reappear when you release Personal Data Lock.
≥
During Personal Data Lock, the “Pre-installed” substitute image is sent to the other
party if you send the substitute image during a videophone call.
≥
If you set “Lock all” during Personal Data Lock, “
” is cleared and “
” appears
instead.
≥
You cannot set Personal Data Lock while “Reject unknown” is set.
You can set “Timer lock ON at close” that automatically activates Key
Lock, Personal Data Lock, or IC Card Lock when the specified time has
elapsed after closing your FOMA terminal.
1
m
1
Set./Service
1
Lock/Security
1
Lock setting
1
Timer lock ON at close
1
Enter your Terminal Security Code
1
Key lock, Personal data lock, or IC card lock
1
Select an elapse time.
If you set to other than “OFF”, “
” appears and then Timer Lock ON At Close is
set. After Personal Data Lock or IC Card Lock is activated, the Lock Release
display appears when you open the FOMA terminal.
<Lock Setting>
Setting a Variety of Locks
Timer Lock ON At Close
Information
≥
When the Stand-by display is not shown, or when another function is working with the
Stand-by display shown, Personal Data Lock or IC Card Lock is not activated even
after the specified time elapses. However, when another function ends after closing
the FOMA terminal, the lock is activated after the specified time elapses.
≥
When a call or mail message comes in after closing the FOMA terminal, or when you
open it, the elapsed time counter returns to 0 seconds.
≥
When this function is activated, the lock is temporarily released if you release each
lock. However, it is re-locked when the specified time elapses after closing the FOMA
terminal.
≥
If Key Lock is set during Timer Lock ON At Close, “
” is cleared and “
” or
“
” appears instead.
Summary of Contents for P-02A
Page 104: ...102...
