Docomo P-02A, Instruction Manual

Page: 76 / 212

74
Vo
ice
/V
id
e
o
pho
ne
Cal
ls
/P
u
sh
Ta
lk
Brightness You can adjust the brightness of the camera image to be sent
to other party to -3 (dark) t3 (bright).
1
Select a brightness level.
White balance You can adjust the colors of the camera image to be sent to
the other party, to make the colors look more natural.
1
Select an item.
Fine weather . . . . . For talking outdoors in fine weather
Cloudy weather . . . For talking in cloudy weather or in the
shade
Automatic . . . . . . . . For adjusting white balance
automatically
Light bulb . . . . . . . . For talking under incandescent light
Color mode set You can switch the color tone of the camera image to be sent
to the other party.
1
Select a color tone.
Night mode You can lengthen the camera’s exposure time to make the
camera image to be sent clear in a dark place.
1
ON or OFF
Focus You can set the focus for the outside camera during a
videophone call.
1
Close-up or Landscape
≥
The focus for the inside camera is fixed to “Portrait” (suitable
mode to shoot portraits), so you cannot change the setting.
Chara-den setup See page 72.
Backlight You can select whether to light the display constantly or light
for about 15 seconds after an operation.
1
Constant light or 15 seconds light
LCD AI See page 114.
Own number You can display your phone number.
Key guide You can display the guide of key operation during a
videophone call.
At videophone
start-up
0
At videophone
start-up
Automatic
At videophone
start-up
Normal
At videophone
start-up
OFF
At videophone
start-up
Landscape
You can set whether to switch to Hands-free automatically for when a
videophone call starts.
1
m
1
Set./Service
1
Videophone
1
Hands-free w/ V. phone
1
ON or OFF
≥
See page 61 for the operation while Hands-free is activated and how to switch to
Hands-free.
You can set the quality of both the received image and sent image on the
display.
1
m
1
Set./Service
1
Videophone
1
Visual preference
1
Select an image quality.
≥
“Prefer motion spd” is effective when there is motion in an image. When there is
little motion, the quality becomes better if you set to “Prefer img qual”.
≥
If you operate from the Function menu during a videophone call, the setting is
effective only for the current videophone call.
<Hands-free with Videophone>
Setting Hands-free Videophone
<Visual Preference>
Setting Image Quality for Videophone
Calls
Information
≥
If the radio wave conditions weaken during a videophone call, the image may appear
like a mosaic.