62
Vo
ice
/V
id
e
o
pho
ne
Cal
ls
/P
u
sh
Ta
lk
1
When you receive a call, the ring tone
sounds and the Call/Charging indicator
flickers.
≥
To vibrate the FOMA terminal for incoming calls, set
“Phone” or “Videophone” of “Vibrator” to other than
“OFF”.
≥
While the phone is ringing for a videophone call,
“Incoming V.phone” is displayed. However, while
ringing for a voice call, this kind of indication is not
displayed.
≥
“
” is displayed at the upper left of the phone
number for incoming international calls.
Information
≥
To connect using a cable (USB connection), set “USB mode setting” to
“Communication mode”.
≥
“
” appears while you are talking or communicating using a USB Hands-free
compatible device.
≥
“
” might appear while the FOMA terminal is connected to a USB Hands-free
compatible device, and “
” while “USB mode setting” is set to “microSD mode”,
depending on the Hands-free device connected.
≥
The display or ring tone for incoming calls follows the settings of the FOMA terminal.
≥
When the sound is set to output from a Hands-free compatible device, the ring tone
sounds from that device even when Manner Mode is activated or “Ring volume” of the
FOMA terminal is set to “Silent”.
≥
The receiving operation in Public Mode (Drive Mode) follows the setting of “Public
(Drive) mode”.
≥
The receiving operation while Record Message is activated follows the setting of
“Record message setting”.
≥
When the sound is set to output from the FOMA terminal, the operation for when the
FOMA terminal is closed during a call follows the setting of “Setting when closed”.
When the sound is set to output from a Hands-free device, the communication state
does not change regardless of “Setting when closed” even if you close the FOMA
terminal.
Receiving a Call/Videophone Call
Chaku-moji message
(See page 54)
2
Press
d
or
O
o
(
) to answer
the call.
Press
d
or
O
o
(
) to answer
the videophone call.
You can send the image through your camera to the
other party.
When you press
m
(
) to answer the videophone
call, the substitute image is sent to the other party.
(Substitute image answering)
≥
Press
m
during a videophone call to switch between
the image through your camera and substitute image
for sending to the other party.
3
Press
h
to end the call after talking.
For Answering a Voice Call
For Answering a Videophone Call
Information
≥
If you close the FOMA terminal during a call, the FOMA terminal works in accordance
with the setting of “Setting when closed”. (See page 65)
Summary of Contents for P-02A
Page 104: ...102...
