54
Apps
Osaifu-Keitai is a function for using “Osaifu-Keitai compatible
services” which enable you to pay, use the handset as
coupons, etc. by simply holding it over scanning devices at
stores etc. and using “Kazashite-Link compatible services”
which enable you to access information by holding the
handset over home electric appliances, smart posters, etc.
You can save electronic money, points, etc. on the IC card or
docomo nano UIM card of the handset and check the balance
and the remaining points, etc. on the screen. In addition, you
can lock Osaifu-Keitai functions to prevent an unauthorized
use of it in case of theft or loss.
For details on Osaifu-Keitai, refer to the DOCOMO website.
※
To use Osaifu-Keitai compatible services, settings are necessary
on a website or an app.
The handset malfunctions may cause data on the IC card
*1
, data
on the docomo nano UIM card
*2
to be lost or changed (Note that
as a rule, you will be asked to delete data when leaving your
handset for repairs etc., since we cannot keep your handset with
such data still remaining in it). For the service such as a reissue,
restoration, temporary keeping or transference of the data,
contact a provider of the Osaifu-Keitai compatible service you
use. Be sure to use the Osaifu-Keitai compatible service
including a backup service for important data.
To use the Osaifu-Keitai compatible service by using data on the
docomo nano UIM card, you need to install an app from a
provider of the Osaifu-Keitai compatible service and set it even if
you continue to use same docomo nano UIM card as before
model change.
DOCOMO shall not be liable for any loss or change of data on
the IC card, data on the docomo nano UIM card or other
damages related to Osaifu-Keitai compatible services caused by
any reason such as malfunctions and model changes.
When the handset is stolen or lost, immediately contact a
provider of the Osaifu-Keitai compatible service you use for
handling methods.
*1 The data saved on the built-in IC card of the Osaifu-Keitai
compatible handset
*2 The data saved on the docomo nano UIM card
To use Osaifu-Keitai compatible services, download the
Osaifu-Keitai compatible app from Osaifu-Keitai compatible
websites and make the setting. Some services do not require the
download of the Osaifu-Keitai compatible app.
1
In the home screen, display the Apps Sheet
/
select “Shopping” folder
/
[Osaifu-Keitai]
:
If the initial settings are not completed, the initial settings
screen appears. Follow the instructions on the screen and
operate.
2
Select a service
:
Make settings on the website of the service or after
downloading the app compatible with the service.
3
Hold the
#
mark of the handset over the
scanning device
Enable [Reader/Writer, P2P] in advance (
1
Hold the
#
mark of the handset over a device
into which an NFC module is built, smart
poster, etc.
Pay attention to the following points when holding the
#
mark
over the other device such as a scanning device or device into
which an NFC module is built.
Do not let the handset strongly clashed with the other device
but slowly bring the handset close to the other device when
holding the
#
mark over it.
Hold the
#
mark over the center of the other device and in
parallel with it. If the other device does not recognize the
built-in IC card even when you do so, slightly move the
handset away from the other device or move the handset
around.
The other device may not recognize the built-in IC card if there
are metallic objects between the
#
mark and the other
device. Remove the handset from its cover or case if the other
device does not recognize the built-in IC card, since equipping
the handset with it may influence the communication
performance.
Osaifu-Keitai
Using Osaifu-Keitai compatible handset
Using “Osaifu-Keitai compatible services”
You cannot use Osaifu-Keitai compatible services in the
following situations. However, you can pay by holding the
handset over a scanning device.
In Airplane mode
When you are charging the handset, connecting Micro USB
Cable 01 (sold separately) to it or connecting an earphone/
microphone to it while the docomo nano UIM card is not
inserted/when the handset has never received radio wave
Osaifu-Keitai compatible services are available even if you
cannot unlock the PIN code of the docomo nano UIM card or
the PIN code is locked.
If you have not subscribed to sp-mode, you may not be able to
use some functions of an Osaifu-Keitai compatible service.
The handset can communicate with scanning devices without
activating Osaifu-Keitai compatible app.
Communicating with the scanning device is available even if
you turn the power off. However, you may not be able to use it if
the power remains turned off for a long time or the battery level
is insufficient.
Depending on the installed Osaifu-Keitai compatible app or
app's settings, Osaifu-Keitai compatible services may not be
used by holding the handset over the scanning device while the
Screen lock is set, the display is turned off or power is turned
off.
Using “Kazashite-Link compatible services”
Precautions about holding over the other
device
mark
D２-01J_E.book 54 ページ
７年
月
日 木曜日 午後
時９分
Summary of Contents for DM-01J
Page 1: ...17 1 INSTRUCTION MANUAL...
