“The DockSider” Mounting Options
DockCraft Industries Bolt On Mount for “The DockSider”
- Kayak Dock Rack and Paddleboard Dock Lift -
For Reference Only – Review the Dock Configuration Guide
Wood Dock with Decking on top of Side Board
Wood Decking overhanging Dock Sideboard
Page 12 of 14
Location #1 - 2 1/4 inches
Location #2 - 5 inches
-
Bolts in 2 locations per Mount
-
2 Mounts per Dock Rack
Standard Hardware
–
Included in Purchase
-
1/4 -20 x 2 ½ inch Stainless Steel cap screw, each location
- ¼ inch Stainless Steel washer, each location
- Stainless Steel Snap Toggler, each location
Standard Installation Requirements
-
Drill ½ inch diameter holes in locations shown
-
Insert Snap Togglers per directions from top of Dock
-
Insert screws and washers then secure.
Decking
1 inch to 1 1/2 inch thick
Dock SideBoard
Typically1 ½ inch wide
Location #1 - 2 1/4 inches
Location #2 - 5 inches
Kayak / Paddle Board Dock Rack
Bolt on Mount
Location #1 - 2 1/4 inches
Location #2 - 5 inches
Hardware
- Standard Hardware
-
1/4 x 2 ½ inch Stainless Steel lag Screw
–
location #1, not included
- ¼ inch Stainless Steel washer, each location
Installation Requirements
-
Standard Installation; except
-
Location #1, Drill 1/8 or 3/16 inch pilot hole through decking and
into side board.
-
Insert Lag Screw and washers to secure.
Ideal for situations when the
underside of your Dock is not
accessible
-
Floating Docks -
