For the DockSide unit, the shorter legs on the Cradle are on the Outside,
For the WaterSide unit, the shorter legs on the Cradle are on the Inside.
When inserting the cradle in the mounting bracket, the head of the clevis pin should be on the outside of
the mounting bracket on one side and the circular retaining ring should be on the outside of the bracket on
the other side. Seat the clevis pin head against the mounting bracket
SETUP of
“The DockSider”
TM
Now that the assemblies are complete, it is now time to SETUP your Kayak Rack to “fit”
your Kayak.
Whether it be the Dockside Cradle or the Waterside Cradle
Mount the Cradle to the Bolt On Mounts
- Both units, Straps are on the inside.
Kayak Storage Rack to Water Level Adjustment
:
If the distance to the water from the dock decking is:
10 to 22 inches: insert clevis pin in 2nd hole of the pivot lateral into the top Slot of the mounting bracket.
17 to 29 inches: insert clevis pin in 2nd hole of the pivot lateral into the bottom Slot of the mounting bracket
20 to 31 inches: insert clevis pin in the 4th hole of the pivot lateral into the top Slot of the mounting bracket
25 to 37 inches: insert clevis pin in 4th hole of the pivot lateral into the bottom Slot of the mounting bracket
Adjust if required - up or down - based on your specific watercraft or if your water level changes significantly
throughout the season.
Page 7 of 14
Installation - Continued
7
–
Similarly to Step #6, Mount the second Dock Mount
Position the second dock mount as shown above
Mark and drill as described in Step 6
Install Snaptogglers and secure mount to dock with screws.
DS100 and WS100
Installation is Complete and
you are now ready for the Final
Adjustments
