Assembly Instruction
Attach Cradle Handle :
1 - Position Handle over Cradle.
2 - Slide the Handle over extension on Cradle.
3 - Depress Snap Button on Cradle.
4 - Seat Handle until Snap Button pops through the Handle hole.
5 - Repeat process for the other Cradle.
Steps 1
–
4
Dockside Rack Waterside Rack
Notes -
Lifting Straps are on the inside
Dockside Rack
–
Short Legs on the outside
Waterside Rack
–
Shorter Legs on the inside
Insert Clevis Pins to set height of rack from water
If the Water Level is 10 to 25 inches below your Dock Decking -
6 - Insert Clevis Pin through Hole #2 in Pivot Lateral such that the head is between the Pivot Lateral and Cradle,
attach retaining ring through the hole in the end of the clevis pin.
7
–
If the Water Level is 25 inches or greater from the Dock Decking
–
Insert Clevis Pin through Hole #4 in Pivot Lateral such that the head is between the Pivot Lateral and Cradle,
attach retaining ring through the hole in the end of the clevis pin.
Dockside Rack
Lifting
Straps
Lifting
Straps
Snap Button
Cam Buckle
Cradle
Handle
Pivot
Lateral
Circular
Retaining
Ring
Hole 4
Hole 2
Hole 4
Hole 2
Clevis Pin
Head
Clevis Pin
Head
Circular
Retaining
Ring
Page 4 of 14
