DNP CL-500, Service Manual

Page: 20 / 60

16
USING SERVICE MODE
3.3 Connecting with CX-320 and CX-3** series
(1) Connect the laminator and printer with the Laminator communication cable same as usual.
Fig. 3
(2) Turn on the power of laminator.
(3) Turn on the power of printer.
(4) Wait the situation of the printer and laminator turned to PREHEAT or READY.
(5) Set printer to ‘download’ mode included in maintenance mode, and update the firmware (Lami***.lmf) with printer
status monitor.
While handling update, laminator can’t display it’s status on the front panel, and printer shows “Downloading Keep
Power On” on the LCD display.
<CAUTION>
It takes about 1 ~ 2 minutes to finish the procedure of download. Don’t turn off the power of laminator and printer.
(6) After complete the download correctly, the laminator start the initialize by itself and LCD display of printer change to
“Download Ready” .
(7) Turn off and on the power of printer to replace the version information saved in the printer.
PC
CL-500
CX-320
(CX-3** series)
OPTION2
(DSUB9)
(Back view)
PRINTER
(DSUB9)
USB