![background image](http://html1.mh-extra.com/html/dmx4all/artnet-dmx-twin-poe/artnet-dmx-twin-poe_user-manual_2514363011.webp)
ArtNet-DMX TWIN PoE
11
DMX4ALL-Command Support
The
ArtNet-DMX TWIN PoE
has an additional communication-serial port which can
receive DMX4ALL Commands via TCP-Packages at Port 10001 or USB.
TCP-Controlling
To control the Interface directly via a TCP-Connection, use the adjusted web browser
IP-address and use Port 10001. The sent and received data are RAW-Data
packages.
Please take the possible DMX4ALL-Commands the separated DMX4ALL-Command
description.
VCP-Controlling
For controlling via a COM-Port a TCP-VCP-Program must be installed, which
provides a virtual Com Port (VCP).
We recommend the tool
Serial to Ethernet Connection
which is tested in our house.
This tool is to found in our Support-Area.
During the installation you must enter
a password (as per margin picture).
After the installation start the tool
„Centos SEC“ which is on the
desktop. Add a VCP with
Add
and
enter the parameter for the VCP-Port
as per margin.
Make sure, that the IP is used which
is possibly entered via the web
browser.