ArtNet-DMX TWIN PoE
8
Device Configuration
Please call within the web browser and within the address-bar the IP of the ArtNet-
DMX Twin PoE (delivery state: 2.0.0.10) to get the following Configuration site:
Each node needs an own
IP-Address
so that the assignment can occur
clearly. Use in accordance to the ArtNet-Specifications the IP-Address 2.x.x.x
or 10.x.x.x
Any other IP-Address can also be used e.g. 192.168.1.10 . In this case the net-
mask has to be fit to 255.255.255.0 !
You can assign each node with any name for a better distinction.
The
Short-Name
is limited up to 18 signs and the
Long-Name
up to 64 signs.
The ArtNet-Parameter
SubNet, Net
and
Port
are to set according to the ArtNet-
Specifications and specify the aim for the DMX-Data.
The
Netmask
is to leave according to the ArtNet-Specification 255.0.0.0 .
With
Port Mode
is to specify for each port, if it should work as DMX-Input (DMX to
ArtNet) or DMX-Output (ArtNet to DMX).
With the activated option
LED indicator auto off
the LEDs at the device are shut
down after 10 minutes with permanent net work connection.
SAVE
stores the Configuration respectively restores the Factory Settings.
