ArtNet-DMX TWIN PoE
15
CE-Conformity
This assembly is controlled by a microprocessor and uses high
frequency. In order to maintain the properties of the module with
regard to CE conformity, installation into a closed metal housing in
accordance with the EMC directive 2014/30/EU is necessary.
Risk-Notes
You purchased a technical product. Conformable to the best available technology the
following risks should not excluded:
Failure risk:
The device can drop out partially or completely at any time without
warning. To reduce the probability of a failure a redundant system structure is
necessary.
Initiation risk:
For the installation of the board, the board must be connected and
adjusted to foreign components according to the device paperwork. This work can
only be done by qualified personnel, which read the full device paperwork and
understand it.
Operating risk:
The Change or the operation under special conditions of the
installed systems/components could as well as hidden defects cause to breakdown
within the running time.
Misusage risk:
Any nonstandard use could cause incalculable risks and is not
allowed.
Warning:
It is not allowed to use the device in an operation, where the safety of
persons depend on this device.
Disposal
Electronical and electronic products must not be disposed in
domestic waste. Dispose the product at the end of its service life
in accordance with applicable legal regulations.
Information on this can be obtained from your local waste
disposal company.
ArtNet
™
is a trade mark of Alderamin Group Ltd. Designed by and Copyright Artistic Licence Holdings
Ltd.
