![background image](http://html1.mh-extra.com/html/dmx4all/artnet-dmx-twin-poe/artnet-dmx-twin-poe_user-manual_2514363009.webp)
ArtNet-DMX TWIN PoE
9
DMX-Output
For the DMX-Output the according ArtNet-DMX TWIN PoE port must be configured
as DMX-Output. Select within the Global-Settings the setting
DMX-Output
.
By clicking
Port 1
or
Port 2
you get the following configuration site:
Framerate
shows the maximum DMX-Frame rate.
MAX complies to the maximum Frame according to the maximum frame rate of ca.
44fs (Frames/Second).
With
ArtNet Fail
the behavior is adjustable which starts, if ArtNet-Data stay away for
over 5 seconds.
The following options are available:
-
HOLD last data
All channels are leaved unchanged
-
CLEAR all to 0%
All DMX-Input channels will be set to 0
-
SET all to 100%
All DMX-Input channels will be set to 255
-
NO OUTPUT
No DMX-Signal is outputted
-
DEFAULT VALUES The stored Default-Values are outputted
In Port 1 the option
HTP-Merge DMX-INPUT 2
is available as soon as port 2 is
configured as
DMX-INPUT
. If this option is activated, the DMX-Data from Port 2 is
merged to the DMX-Output (port 1) HTP (Highest).
Via
Enable Madrix-Sync / ArtNet-Sync
the DMX-Output of several ArtNet-Devices
can be synchronized via ArtSync or by usage the Software MADRIX
®
.
The option
Save current DMX values as defaults
stores the current DMX-Data and
restores these after turning on.