manualshive.com logo in svg

DLS FlexxPump 250 OLED, User Manual

Share
Download
DLS FlexxPump 250 OLED User Manual Download Page 37

User manual 250/400 OLED 

Rev.: SG-20220516

Page 36 of 79

FlexxPump 250 / 400 OLED

User manual

No changing of the operating mode:

 If you do not want to change the operating mode, the activation and programming key must remain 

removed from the action area.

 The confirmation hook appears; for visual confirmation, the display and the hook flash twice. The 

submenu  now  automatically  takes  you  to  the  specific  parameters  within  the  operating  mode.  The 

explanation of the parameters and the setting options can be found in the following chapters.

If  the  specific  parameters  of  the  operating  modes  have  been  run  through  without  any  changes,  the 

cartridge volume appears as the last setting option with the display keyword Volume. You now have the 

option of changing the value of the cartridge size.

Change the value of the cartridge size:

 If you want to change the cartridge size, move the activation and programming key back to the action 

area. 

 The double circle appears and the next cartridge size is shown in the display. The double circle lights 

up as long as the activation and programming key is on the action surface; the adjustable cartridge sizes 

run through alternately one after the other. 

 When the desired cartridge size is shown in the display, remove the activation and programming key 

from the action area.

 The double circle disappears and the confirmation hook appears; for visual confirmation, the display 

and the hook flash twice. The selected cartridge size has now been accepted.

No changing the value of the cartridge size:

 If you do not want to change the cartridge size, the activation and programming key must remain 

removed from the action area.

 The confirmation hook appears; the display and the hook flash twice for visual confirmation. 

 The Settings menu can only be accessed from ON mode (FP 250/400 OLED switched on). Once 

you have entered the Settings menu, return to the ON mode.

 Before commissioning, check if the correct cartridge size is set in the FP 250/400 OLED software. 

The cartridge size used and the cartridge size set in the software must be identical!

Summary of Contents for FlexxPump 250 OLED

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands