manualshive.com logo in svg

DLS FlexxPump 250 OLED, User Manual

Share
Download
DLS FlexxPump 250 OLED User Manual Download Page 30

User manual 250/400 OLED 

Rev.: SG-20220516

Page 29 of 79

FlexxPump 250 / 400 OLED

User manual

 FP 250/400 OLED is switched on (ON).

 Hold the activation and programming key on the action area. The double circle appears in the 

bottom right corner. Leave the activation and programming key on the action area until 

OFF

 appears in 

the display. Remove the activation and programming key from the action area as long as ON is shown 

in the display. The double circle disappears; the confirmation hook appears; the display and the hook 

flash twice for visual confirmation.

 FP 250/400 OLED is switched off (OFF); OFF appears in the display. The FP 250/400 OLED no 

longer dispenses lubricant. The FP 250/400 OLED activates a screen saver after approx. 10 seconds. 

The OFF indicator on the display moves from left to right and from top to bottom.

 Insert the activation and programming key into the hole provided on the upper housing of the 

FP 250/400 OLED.

 The FP 250/400 OLED can be switched off in any state in the manner described here.

Switch the FP4 off:

Summary of Contents for FlexxPump 250 OLED

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands