manualshive.com logo in svg

DLS FlexxPump 250 OLED, User Manual

Share
Download
DLS FlexxPump 250 OLED User Manual Download Page 31

User manual 250/400 OLED 

Rev.: SG-20220516

Page 30 of 79

FlexxPump 250 / 400 OLED

User manual

6.3.2. Get information about the FP 250/400 OLED

The Info menu is used to inform the user about the firmware used in the FP 250/400 OLED and the 

settings made and currently active.

Nothing can be changed by the user in the Info menu. The values of the set parameters are displayed 

in an unchangeable sequence. The values displayed depend on the selected operating mode. The 

following shows the basic sequence for the set operating mode Setting lubrication cycle duration.

Procedure:

 FP 250/400 OLED is switched off (OFF).

 Remove the activation and programming key from the upper housing of the FP 250/400 OLED and 

place it on the action area.

 Hold the activation and programming key on the action area. The double circle appears in the 

bottom right corner. Leave the activation and programming key on the action surface until 

Info

 appears 

in the display. Remove the activation and programming key from the action area until Info appears in 

the display. The double circle disappears; the confirmation hook appears; the display and the hook 

flash twice for visual confirmation.

 FP 250/400 OLED informs you optically on the display about the set values.

 Insert the activation and programming key into the hole provided on the upper housing of the 

FP 250/400 OLED.

 The Info menu can only be accessed from OFF mode (FP 250/400 OLED switched off). If you have 

accessed the Info menu, you will automatically return to the OFF mode.

depending on the selected 

operating mode

Summary of Contents for FlexxPump 250 OLED

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands