manualshive.com logo in svg

DLS FlexxPump 250 OLED, User Manual

Share
Download
DLS FlexxPump 250 OLED User Manual Download Page 29

User manual 250/400 OLED 

Rev.: SG-20220516

Page 28 of 79

FlexxPump 250 / 400 OLED

User manual

6.3.1. Switching FP 250/400 OLED on and off

Switch the FP 250/400 OLED on:

 FP 250/400 OLED is switched off (OFF).

 Hold the activation and programming key on the action area. The double circle appears in the bottom 

right corner. Leave the activation and programming key on the action area until 

ON

 appears in the 

display. Remove the activation and programming key from the action area as long as ON is shown in 

the display. The double circle disappears; the confirmation hook appears; the display and the hook 

flash twice for visual confirmation.

 After the self-check of the FP 250/400 OLED, ON is shown in the display. In this state, the 

FP 250/400 OLED has been successfully commissioned and will supply lubricant according to the set 

values. The FP 250/400 OLED activates a screen saver after approx. 10 seconds. The ON indicator on 

the display moves from left to right and from top to bottom.

 Insert the activation and programming key into the hole provided on the upper housing of the 

FP 250/400 OLED.

When switched on, the FP 250/400 OLED shows you the currently set operating mode. The following 

displays represent the individual operating modes:

Setting lubrication cycle 

duration

Setting emptying time

Pulse control mode

Summary of Contents for FlexxPump 250 OLED

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands