DLI DLM-4 ZONE, Manual

Page: 14 / 19

DLM-4 ZONE DLM-4 ZONE
Controller Controller
26 27
If the scan is successful, the available firmware file(s) will be
displayed. Move the cursor to the newest version of the firmware to
be installed. 8
Select the file to be updated.
Press the Enter button.
Verify the displayed firmware file update is correct on the display.
Press the Enter button to update the firmware.
When the update is completed, the unit will reset, and return to
the Zone status menu.
9
10
11
12
13
*NOTE:
The user data will
NOT
be over-written when the firmware is
updated.
*NOTE: If the scan does not detect the MicroSD card, the display will
read:
Warning:
No SD card
detected
Please
insert SD card
7.11 Messages / Data Log
If there is a dimming event, or a power failure event, a message
including details including time and date of the event, temperature
recorded, and a description of the event will be created by the DLM-
4 Zone Controller and stored within memory to be viewed later. The
controller can record and store a total of 10 events.
The messages are accessed by pressing the Find button to display the
stored messages, and then pressing the Enter button in order to clear
/ reset the message log.
MESSAGES / DATA LOG MENU
7.12 Power Monitoring
The DLM-4 Zone Controller is constantly monitoring the power going
to the DLM-4 Zone Controller. When power is re-applied to the DLM-4
Zone Controller, the unit will start up and display the Power Failure
error. The unit will show the time that the power turned off, and the
time the power turned back on.
*NOTE:
To return to the Zone status menu, press the ENTER button.
Power failure
04:07:25pm
03/08/2017
Power On
04:07:41pm
03/08/2017
ENTER to
Return
Update code is
DIMMER
VER 3.2
Chip code is
DIMMER
VER 3.1
Update
?