DLM-4 ZONE
DLM-4 ZONE
Controller
Controller
20
21
7.8 To Manually Override /
Force a Zone:
*NOTE:
To disable / cancel the OverRide / force function, simply
change the “√” back to an “×”
When the OverRide menu is displayed, use the Up and Down
buttons to move the cursor to the Zone # that you want to force
On (or Off).
Press Enter to access the Zone setting.
Use the Up or Down button to change the “×” to a “√”
Pressing Enter will force the Zone On (or Off)
The Zone countdown shows the current output status and at the time
remaining before changing the ON/OFF status.
1
2
3
4
OVERRIDE / FORCE PAGE
Override
Zone
Force
Zone
1
X
2
X
3
X
4
X
1
2
3
4
ON
ON
ON
ON
04:09:07
04:09:07
04:09:07
04:09:07
Countdown
7.7 Manual OverRide
(Force) page
Occasionally the user may want to manually turn each lighting Zone
On or Off manually. Each of the 4 zones within the DLM-4 ZONE
controller can be manually activated (turned ON or OFF) by accessing
the Manual over-ride page. When a zone is manually “forced” on or
off, the force will remain in effect until the next scheduled on or off
cycle for that zone. (Force is automatically reset once next timed event
occurs)
Summary of Contents for DLM-4 ZONE
Page 1: ...DLM 4 ZONE Controller ...
