Connecting speakers
Important information
Ø
All shown or mentioned connection cables or not included in the delivery, they are availa-
ble in specialised trade.
Ø
Please switch off all involved devices before establishing the connections.
Ø
In order to prevent the development of humming and ambient noises, never pass the
connection cables together with speaker or power cords.
Ø
BEFORE connecting the speakers, check their impedance. Connect only speakers having
an impedance of 4 - 8 ohm or more.
Ø
On the red cable terminal, the positive speaker signal is present, on the black terminal,
the negative signal is present. When connecting the boxes you have to make sure that
you always connect the positive speaker signal with the positive (+) input and the nega-
tive signal with the negative (-) input of the box.
Ø
As you can connect up to seven satellite speakers to AV-R600, we’ve dropped the spea-
ker output for the subwoofer. But nevertheless you can of course connect one, but then it
has to be an active typ, i.e. with built-in amplifier.
Ø
If you want the rear surround signal to be reproduced by not 2 speakers (as shown abo-
ve) but only one, please connect it to the LB/
BS
(= Back Surround) terminal.
11
