Wenn Sie eine digitale Programmquelle korrekt angeschlossen und angewählt haben, er-
scheint das
- Symbol im Display. Wenn Sie stattdessen „
UNLOCK
” lesen, stimmt etwas
mit der Verbindung nicht, oder Sie haben den falschen Eingang angewählt.
If you have activated one of the digital inputs, you can, depending on the incoming sound
material, select between multi-channel operation and 2-channel operation (=stereo with
subwoofer). Press the
DTS / DOLBY DIGITAL
key for 5.1-operation and the
STEREO
key
for 2-channel operation.
If your sound material is analogue, press the
SURROUND MODE
key and you can produce
a realistic, three-dimensional stereophonic sound which creates distances, movements and
relative positions and thus invests your cinema experience with an impressing presence. If
SURROUND MODE is activated, the display shows the currently selected mode:
Movie
,
Music
,
Room
,
Theater
oder
Hall
. If you choose
PASSTHRU
the signals will not be processed. In order
to deactivate the surround mode, press the 2CH-key.
PRO LOGIC IIx
Dolby® Pro Logic® IIx technology (PLIIx) is an extension of Dolby Pro Logic II (PLII) ma-
trix-decoding technology. Dolby Pro Logic IIx technology offers decoders more flexibility in
deriving additional outputs to take better advantage of all the amplifiers and speakers
found in higher-end surround systems, and to do so from a wider range of program material
and sources. There are two standard modes: „Movie” und „Music”.
How to get PL II x:
1. Press the
PROLOGIC IIx
buttonat the device or the
DOLBY PL IIx
button on the R/C.
This will activate „SURROUND BACK 2 SPEAKERS DOLBY PL II x 7 MOVIE”. Please use
this setting if you’re using 2 seperate rear surround speakers in your system (factory de-
fault mode). We recommend this mode when viewing movies.
2. Press this button again to change the mode to „SURROUND BACK 2 SPEAKERS DOLBY PL
II x 7 MUSIC”. This setting is better suited for viewing musical performaces.
3. In both „Movie” and „Music” modes you can press the SURROUND BACK button, if you’re
using just 1 speaker for the rear surround channel (press 1 x) or if you’re using no rear
surround speakers at all (press 2 x).
Tip
: The currently selected mode is shown in the display.
Experiment with these settings until you have found a setting that is in your opinion opti-
mal. Orientate yourself always by the format of the present audio material. Information on
this can in most cases be found on the case of the data medium.
17
