11
For editing, navigate to the relevant button with
+
and
-
and confirm with
ok
. Set
the desired value with
+
and
-
, navigate to the different numbers with arrow left
and right and confirm with
ok
again.
Cycles
= Number of repetitions of the program, selection 1-9 possible.
Step
= Section within a program. Selection 1-9 possible.
Hours
= Duration of the section in hours
Minutes
= Duration of the section in minutes
Temperature
= Set temperature of the section
Rising time
= Time setting for tempering the sample to set temperature. This set-
ting is only required if the sample is to be tempered slower than technically possi-
ble.
If the sample is to be tempered as fast as possible, set the value to 0.
Rotational speed
=
Shaking frequency with which the blocks are shaken.
The last number (1. digit) can not be selected and changed.
To temper the sample with changing mixing and resting phases
(interval shaking)
,
intervals can be set. Resting and shaking phases alternate until the expiration of the
time, in parallel with the tempering process. Set the intervals with
Pause
[min]
and
Mix [s]
:
Pause
[min]
=
Resting time of up to 9.9 minutes. If no intervals are to be set, enter
the value 0.0 here.
Mix [s]
= Short shaking time up to 9 seconds after resting time
Starting a program
Summary of Contents for HLC MHL 23
Page 25: ...25 800 68 13 02_Manual_Smart_Control docx...
Page 26: ...26...
