DITABIS HLC MHL 23, Operating Manual

Page: 6 / 26

6
Switch on the system with the mains switch on the back of the system. The
start menu will be displayed. The green LED turns on as soon as a process is
running.
Operation
Parameter Setting
Start menu
This menu is displayed after the power-on,
after abortion of after the normal completion
of a process.
The last set values are retained even after the
switch-off of the system.
Setup menu
Push the up arrow key for 5 seconds , then
the setup menu is displayed. With
+
and
–
the values can be selected for setting.
The selected box flashes, with ok it will be
permanently set for changing. With the keys
+
and
- ,
the input or the values can be
changed.
If an input is confirmed with ok , the box is
highlighted flashing again.
With confirming the button Start menu , the
start menu is displayed again.
The following values can be adapted:
display (-colour)
contrast
brightness
language
rotation direction
confirm process end:
Yes: at the process end, a signal is audible