DITABIS HLC MHL 23, Operating Manual

Page: 14 / 26

14
Select at "Transfer": "Record Text", enter the location and define the file
name as .txt Start the Hyper Terminal and the process. Every minute, the
following data are recorded in text format and separated by comma:
Time from start (hh:mm)
Temperature in °C (tmp)
Rotational speed in 1/min (rpm)
Program no. (prg)
Cycle (cycle)
Program step (step)
Time from new program step (step
time)
Rise time (rem. risetime_m)
Interval mix ( mix_s)
Interval pause (pause_m)
If you open the text file you
selected for saving, you can
see the complete process
in the form shown on the
right.
Since the data are separat-
ed by commas, you can
easily create an Excel file
and generate one or more
curves from that.
START
Setpoints
xx:xx,+37.0,0200,01,01,01,00:01,00,9,0.2
time hh:mm,tmp,rpm,prg,cycle,step,steptime
hh:mm,rem. risetime_m,mix_s,pause_m
00:00,+26.9,0000,01,01,01,00:00,00,9,0.2
00:01,+33.7,0220,01,01,01,00:00,00,9,0.2
00:02,+36.7,0000,01,01,01,00:00,00,9,0.2
00:03,+36.9,0000,01,01,01,00:00,00,9,0.2
START
Setpoints
xx:xx,+70.0,0300,01,01,02,00:12,10,9,0.1
time hh:mm,tmp,rpm,prg,cycle,step,steptime
hh:mm,rem. risetime_m,mix_s,pause_m
00:04,+36.9,0000,01,01,02,00:00,10,9,0.1
00:05,+39.1,0000,01,01,02,00:01,09,9,0.1
00:06,+42.1,0000,01,01,02,00:02,08,9,0.1
00:07,+45.2,0300,01,01,02,00:03,07,9,0.1
00:08,+48.4,0300,01,01,02,00:04,06,9,0.1
00:09,+51.7,0000,01,01,02,00:05,05,9,0.1
00:10,+54.9,0000,01,01,02,00:06,04,9,0.1
00:11,+58.2,0300,01,01,02,00:07,03,9,0.1
00:12,+61.5,0300,01,01,02,00:08,02,9,0.1
00:13,+64.7,0000,01,01,02,00:09,01,9,0.1
STOP
Enter process data via USB
For the process control of a HLC system with Smart Control via a USB-
interface, four commands are possible and required:
Start