27
ECL-PTU-207 Preloaded Applications
nciMiscConfig (nviFP44)
This configuration property defines miscellaneous configurations for the HVAC control functions.
Field
Description
SI3Config
This configuration is used to configure sensor type link to SI3 input.
SpOffsetLimit
Setpoint Offset Limit for EC-Remote remote control and EC-Smart-Vue
SpaceTempOffset
Space Temperature Calibration Offset
DischTempOffset
Discharge Temperature Calibration Offset
ReturnTempOffset
Return Temperature Calibration Offset
MinDischAirSP
Minimum Discharge Temperature Setpoint Limitation
MaxDischAirSP
Maximum Discharge Temperature Setpoint Limitation
FrostProtSp
Frost Protection Setpoint
DischAirLimitType
Discharge temperature limitation type
ChgOverDelay
Change Over Delay between Heat/Cool Mode
MotionHoldTime
Motion Hold Time Delay (Delay is divided by 3 when BMS is in Unoccupied Mode)
BypassTime
Bypass Time from Occupany Push Button or EC-Smart-Vue
Sensor1Zone
EC-Multi-Sensor #1 Infrared Zone Number
Sensor2Zone
Unused
SheddingOnSetpoint
Enable Shedding via Setpoints Offset or via direct load shedding
SheddingEnabled
Enable Shedding Commands for HVAC equipment
Field
Min Value
Max Value
Default Value
SI3Config
0 (SpaceTemp)
4 (Other)
0
SpOffsetLimit
0°C
10°C
3°C
SpaceTempOffset
-10°C
10°C
0°C
DischTempOffset
-10°C
10°C
0°C
ReturnTempOffset
-10°C
10°C
0°C
MinDischAirSP
5 °C
20 °C
13°C
MaxDischAirSP
20 °C
45 °C
35°C
FrostProtSp
2 °C
15 °C
8 °C
DischAirLimitType
0
3
0(Not Limited)
ChgOverDelay
0 min
30 min
1 min
MotionHoldTime
1 min
120 min
15 min
BypassTime
0 min
360 min
60 min
Sensor1Zone
0
30
0
Sensor2Zone
0
30
0
SheddingOnSetpoint
0
1
0
SheddingEnabled
0
1
1
Reserved1
0
1
1
Reserved2
0
1
0
Reserved3
0
1
0
Reserved4
0
1
0
Reserved5
0
1
0
Reserved6
0
1
0
ID
Units
Default Value
nviFP44
UNVT_Misc_Config_PTU
N/A
Variables
