34
T
ROUBLESHOOTING
What’s
Happening
What’s Wrong
What You Can Do
While you do
a remote
procedure, the
remote control
“times out.”
• If you don’t press
any button
for 20 seconds in
a programming
sequence,
the remote
“times out.”
• If you hold a
button longer
than two
minutes, the
remote control
stops
transmitting to
save battery life.
Start over again.
When you
press the
remote control
Power button
to turn the
receiver on,
the receiver’s
front panel
Power light
doesn’t turn
on.
• Maybe the
batteries are
weak or dead.
• Maybe you didn’t
plug the receiver
power cord into a
power outlet, or
maybe there’s a
problem with the
power.
• Maybe the
remote isn’t in
SAT
mode.
• Maybe the
remote and the
receiver have
different
addresses.
• Replace the remote batteries with
fresh ones.
• Make sure the receiver power cord
is plugged into a power outlet.
• Press
SAT
to set the remote to
SAT
mode to control the receiver.
• Make sure the remote and the
receiver have the same address.
See
Setting Up to Control the
Receiver
on page 5.
The receiver
changes
channels and
displays
menus when I
am not using
the remote
control.
• UHF signals from
a neighbor's
remote may be
controlling your
receiver.
• Change your remote and receiver
address (see
Setting Up to Control
the Receiver
on page 5).
text_dishnondvr.fm Page 34 Monday, November 7, 2005 12:03 PM
Downloaded from
www.Manualslib.com
manuals search engine
Summary of Contents for 301 IR 123271
