Dish Network 301 IR 123271, Manual

Page: 12 / 46

11
For AUX mode , the first group of flashes tells you what the
AUX
mode controls. A quick flash (zero) before the three-digit
code is for a TV; one regular flash is for a VCR or DVD player;
and two flashes is for a tuner or amplifier. For example, if the
TV code is 570, the AUX mode button flashes once quickly,
pauses, flashes five times, pauses, flashes seven times, pauses,
and flashes once quickly.
S
WITCHING
B
ETWEEN
TV
AND
D
EVICE
V
OLUME
C
ONTROL
When you set up the remote to control a TV, the
MUTE
and
VOLUME
buttons control the TV volume. However, if you want to use the AUX
mode to control a tuner or amplifier and the device has a volume
setting, you can set up the remote to control the device’s volume
instead of the TV volume.
To set the remote to control the device’s volume :
1. Press and hold the AUX mode button
for three seconds, and then let go of it. The AUX mode
button will blink.
2. Press the POUND ( # ) button.
3. Press the plus (+) side of the VOLUME
button.
4. Press the
0
number button.
5. Press the POUND ( # ) button.
The AUX mode button flashes three times.
6. Press the SAT mode button.
7. Press the plus (+) and minus (-) sides of the VOLUME
button.
The device’s volume changes and the
AUX mode
button lights instead of the
TV
mode button.
To set the remote back to control the TV volume :
1. Press and hold the
TV
mode button
for three seconds, and then let go of it. The TV mode
button will blink.
text_dishnondvr.fm Page 11 Monday, November 7, 2005 12:03 PM
Downloaded from www.Manualslib.com manuals search engine