Dish Network 301 IR 123271, Manual

Page: 14 / 46

13
C
ONTROLLING THE
S
ATELLITE
R
ECEIVER
S
AT
M
ODE
B
UTTON
Press this button to set the remote to SAT (“satellite”) mode to control
the receiver. The SAT mode button’s back light stays lit for about two
seconds to show you’ve set the remote to SAT mode. Make sure you
keep the remote in SAT mode to use the buttons following buttons.
Note : Your satellite receiver may not provide all of the functions
described below. Consult your receiver’s user guide for the features
your receiver provides.
TV/V
IDEO
B
UTTON
If you connect the receiver with its back panel TV ANTENNA/CABLE
IN and TV SET OUT ports, use this button to switch the receiver
between the satellite signal (connect it to the SATELLITE IN port) and
another video signal like a cable or broadcast TV antenna input
(connect it to the receiver’s
TV ANTENNA/CABLE IN input).
P
OWER
B
UTTONS
Press the blank POWER button to turn the receiver on or off.
Press the TV POWER button to turn your TV off and on.
Note : You must set up the remote to control the TV for the TV
POWER button to work. See Setting Up to Control Other Devices on
page 8.
V
OLUME
B
UTTON
Press this button to raise (+) or lower (-) the TV sound volume
.
Note : You must set up the remote to control the TV for the VOLUME
button to work. See Setting Up to Control Other Devices on page 8.
text_dishnondvr.fm Page 13 Monday, November 7, 2005 12:03 PM
Downloaded from www.Manualslib.com manuals search engine