Dish Network 301 IR 123271, Manual

Page: 3 / 46

2
R
EMOTE
C
ONTROL
B
ASICS
This remote control gives you easy access to all the features of a DISH
Network satellite TV receiver. You can set up the remote to control the
satellite TV receiver and up to three other devices. These devices can
be a TV, a VCR or DVD player, and a third device.
M
ODELS
S
UPPORTED BY THIS
G
UIDE
This user’s guide supports the following remote control models as
shown on the label on the back of the remote:
• 3.0/3.1/3.2 - Infrared (IR) only. For use with appropriate
IR-controlled DISH Network receivers.
• 4.0 - Infrared/Ultra-High Frequency Pro (IR/UHF Pro). For use
with appropriate UHF Pro-controlled DISH Network receivers.
The 4.0 remote can be converted to one of three different remote
types used on a DISH 322 receiver:
With the blue 2 UHF Pro key installed, this remote
will operate the
UHF Pro side of the DISH 322
receiver. The remote comes with this key already
installed.
With the green 1 key installed (no UHF Pro
marking), this remote will operate the
IR side
of the DISH 322 receiver. This remote will look
and work exactly like a 3.0 IR remote. See
instructions in
Converting the 4.0 Remote .
With the green 1 UHF Pro key installed, this
remote will operate the
side of the DISH 322
receiver from a distance using UHF Pro. See
instructions in
Converting the 4.0 Remote .
If you set up your DISH 322 to operate the side
using UHF Pro, the two UHF Pro remotes for this
receiver will interfere with each other when operated at
the same time. This may prevent the remotes from
operating the receiver momentarily.
1
text_dishnondvr.fm Page 2 Monday, November 7, 2005 12:03 PM
Downloaded from www.Manualslib.com manuals search engine