Discovery Telecom ESIM002 User Manual Download Page 41

Page: 41 / 48

ESIM022 User manual v1.1

By default, Device Started notification is disabled. To enable/disable it and set the text for this

notification, please refer to the following configuration methods.

Enable Device

Started

notification and

set the text

SMS

SMS text message content:

SSMS:start-text

Value

start-text

– up to 23 characters System Star-

ted notifi cation text.

Example:

SSMS:ESIM022 started

Config

Tool

This operation may be carried out from the PC using the

ELDES Configuration Tool

software.

Disable

Device Started

notification

SMS

SMS text message content:

SSMS:OFF

Example:

SSMS:OFF

Config

Tool

This operation may be carried out from the PC using the

ELDES Configuration Tool

software.

By default, System Shutdown notification is disabled. To enable/disable it and set the text for this

notification, please refer to the following configuration methods.

Enable Device

Shutdown

notification

SMS

SMS text message content:

ALLOFF:ON

Example:

ALLOFF:ON

Config

Tool

This operation may be carried out from the PC using the

ELDES Configuration Tool

software.

Set Device

Shutdown

notification text

Config

Tool

This operation may be carried out from the PC using the

ELDES Configuration Tool

software.

Summary of Contents for ESIM002

















































Search results

Summary of Contents for ESIM002

Reviews:

Related manuals for ESIM002

Brands by name

Popular brands

Discovery Telecom ESIM002, User Manual

Search results

Summary of Contents for ESIM002

Reviews:

Related manuals for ESIM002

Brands by name

Popular brands