11
11
ESIM022 User manual v1.1
3. INSTALLATION
• The system should be installed indoors, in stationary environment ONLY.
• For the connection of input/output terminals, use 0.50 mm
2
thread unshielded cable of up to
100 meters length.
1. Wire up the system in accordance with the wiring diagrams (see
2.3 Wiring Diagrams
for
more details).
2. When placing the system, follow the recommendations:
Never install in the following locations:
• inside the metal cabinet
• closer than 20 cm to the metal surface
and/or power lines
3. Disable the PIN code request of the SIM card by inserting it into a mobile phone and following
the proper menu steps.
4. Once the PIN code is disabled, insert the SIM card into the SIM card slot / holder of ESIM022
system.
8
OPEN
7
9
10
5. If you have obtained a back-up battery with your system, insert it into the battery slots. Take
care when connecting positive and negative battery terminals.
6. Power up the system and wait until the LED indicator lights up indicating system status. Wait
until the LED indicator starts flashing every 1 second indicating successful connection to GSM
OPEN
11
6
