25
25
ESIM022 User manual v1.1
10. ALARM/RESTORE NOTIFICATIONS
The system can notify the preset user phone number by the following methods that can be used
only individually:
•
SMS text message
– in the event of input Z1, input Z2 or tamper alarm or restore. This
method is selected by default.
•
Phone call
– in the event of input Z1, input Z2 or tamper alarm only.
Set notification
method as phone
call
SMS
SMS text message content:
CALL
Example:
CALL
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
Set notification
method as SMS
text message
SMS
SMS text message content:
SMS
Example:
SMS
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
SMS
By default, in the event of tamper or input alarm or restore, the system will follow
this pattern:
a) The system attempts to send an SMS text message containing input alarm/
restore text to the first preset user phone number only.
b) If the user phone number is unavailable and the system fails to receive the
SMS delivery report within 20 seconds, it will attempt to send the SMS text
message to the next preset user phone number. The system may fail to de-
liver the SMS text message to the preset user phone number due to the fol-
lowing reasons:
• user’s mobile phone has been switched off.
• user’s mobile phone has been out of GSM signal coverage.
c) The system will continue sending the SMS text message to the next preset
user phone number. The system sends the SMS text message only once and
will not return to the first user phone number if the second one was unavail-
able.
