23
The Closed-loop Configuration Procedure
Refer to the latest Discover Battery documentation for battery values and the latest
Sol-Ark documentation for menu navigation and details on the setup procedure.
1. Set the Discover Lithium batteries to ON and set the inverter to ON.
2. Using the touch screen and keypad on the inverter, navigate from the SYSTEM
SETUP menu to the BATT SETUP menu screen.
3. Enable and disable parameters according to the instructions in the tables
below.
4. Set each adjustable value according to the instructions in the tables below
5. Touch the OK button to save all onscreen values - Ignore data displayed in
GREY boxes.
NOTE
Touch the Sol-Ark screen to:
• Navigate the Sol-Ark onsreen menus.
• Enable parameters.
• Activate the adjustment of values.
• Save all onscreen settings.
Values are adjusted using the keypad.
NOTE
Enable parameters with a CHECKMARK, and disable parameters by leaving
them unchecked. Touch a WHITE box onscreen to activate the adjustment of that
value. Selecting parameters that have been enabled and disabled alters values
that are available to be adjusted.
• A WHITE BOX indicates values that can be adjusted.
• A GREY BOX indicates values that cannot be adjusted, and any
displayed data should be ignored.
NOTE
If necessary, configure Sol-Ark inverters to operate in parallel before setting the
parameters for battery operation.
6.3.1 Closed-Loop - Batt Setup > Batt
Touch the BATT tab onscreen to start the programming sequence (Figure 12).
• Touch the OK button to save all onscreen values - Ignore data displayed
in GREY boxes.
Summary of Contents for 950-0025
Page 1: ...1 805 0038 REV A 950 0025 SOL ARK USER MANUAL...
Page 28: ...28 NOTES...
