t
Reflex Duplicator Manual
- 3 -
3. Maintenance:
It is very important to operate and keep the duplicator in a
dust free, clean environment since dust is the number 1 killer
for CD/DVD recording devices. Failure to do so may severely
damage your duplicator. We strongly suggest you place an
Air Cleaner next to the duplicator and constantly use the Air
Duster (Can Air) to clear off any dust on the surface of the
duplicator.
Do not try to use Air Duster to clean the
duplicator while the reader/writer trays are open.
In doing so, you may inadvertently blow dust
into the recording device and damage the
recording device.
4. Proper Shutdown:
To avoid possible system failures the duplicator must be
shutdown properly. To shutdown the duplicator, use the UP or
DOWN arrow keys or the ‘Shutdown“ hot key and follow
instructions on the screen. Turning off your duplicator without
performing this function will increase the risk of damaging
your duplicator.
t
Reflex Duplicator Manual
- 4 -
Tutorial Guide:
I. Make
Disc-to-Disc
Copies
This process will copy your master disc to several blank discs
simultaneously.
When you turn on your duplicator, after it has booted up, you
should see the following signifying your duplicator is ready.
1. Make sure the Master Reading Source is set to the
READER.
It is very important to make sure that your current Master
Reading Source is the top tray in order to avoid
unnecessary error messages. To check the Master Reading
Source, please do the following:
a. Use UP or DOWN arrow buttons or “Source“ hot key
to navigate to the following screen.
b. Press “ENT“ to enter Select Source Menu and you
shall see the following:
Disc Makers .99
1. COPY
Set Up
5.2. Select Source
