t
Reflex Duplicator Manual
- 5 -
*** The Reader Port could be indexed as 1.0.
Either 1.0 or 2.0 is fine.
Make sure it is located at the “Reader Port“. If not, then
you need to press UP or DOWN navigation button to
search for it.
c. Press “ENT“ to submit your selection.
2. Go back to “COPY“ Menu.
a. Use UP or DOWN arrow button to navigate to the
following screen:
3. Start the Copy Process.
a. Insert your master disc and your blank discs into the
corresponding tray(s) and press “ENT“ button to enter
COPY menu. You will see the duplicator mode menu like
below:
Now, you have been given two choices:
•
Load and Copy
•
On the Fly
Disc Makers .99
1. COPY
Duplication Mode:
Load and Copy
Reader Port 2.0
DVDR
t
Reflex Duplicator Manual
- 6 -
For detail information, please review “Tutorial Guide XII:
Introduction to Duplication Mode.“
Once you have decided which mode you would like to run,
press UP or DOWN arrow button until your desired mode
is displayed and press “ENT“ button to confirm.
b. Then. you will see the Counter Selection Menu like the
following:
c. The Counter Selection Menu will let you choose how many
copies you want to make for your project
You can select “No Counter“ if you prefer to copy continuously
with no interruption. (It will still count the number of copies, but it
will not notify you when to stop.) To select the “No Counter“,
simply press “ENT“ button when you see the screen above. Then
skip below and continue on to step “d“.
Or, you can select “Specify Counter“ between 1 to 9999 by
pressing the UP or DOWN navigation button to the below screen:
Then please press “ENT“ button to submit. You shall see the
screen below:
Counter:
Specify Counter
Specify Counter:
[0 ] OK?
Counter:
No Counter
