t
Reflex Duplicator Manual
- 15 -
partition and press “ENT“ to submit. You will see the
following:
d. Name the partition you are about to load into the Hard
Drive. To enter the name, you need to use the UP or
DOWN buttons to select the character and use “ENT“ or
“ESC“ button to move the cursor position and once
youíve finished, move the cursor to “OK“ and press
“ENT“. For example, if you want to name the partition for
your master disc as “FUN“. Then do the following:
Make sure the cursor is located at the first position:
i.
Press “DOWN“ button consecutively until “F“
is displayed.
ii.
Press “ENT“ button once to move the cursor to
the next position.
iii.
Press “DOWN“ button consecutively until “U“
is displayed.
iv.
Press “ENT“ button once to move the cursor to
the next position.
v.
Press “DOWN“ button consecutively until “N“
is displayed.
vi.
Press “ENT“ button once to move the cursor to
the next position.
Edit Partition Name
[ ] OK?
Edit Partition Name
[x ] OK?
t
Reflex Duplicator Manual
- 16 -
vii.
The name “FUN“ will be displayed. Press
“ENT“ consecutively until the cursor is moved
to “OK“.
viii.
Then, press “ENT“ once to submit your name
selection.
e. Now you shall see the following confirmation screen:
f. Press “ENT“ button to confirm. Once your master disc has
been recognized. The loading progress indicator will be
displayed and you shall see the following
g. Once your master disc has been loaded completely, you
shall see the following:
Then, you can press “ENT“ button to go back to the Hard
Drive Setup Menu.
3. Go back to “COPY“ Menu.
Load Partition?
[FUN ], OK?
Load Partition OK!
Press OK to Continue
Loading ... FUN
1% 123MB loaded
*The “123MB” indicates the amount of data has
been loaded to the Hard Drive.
