Danish Interpretation Systems
Installation Manual
Manual 01 19 60011
51
9
After the Utility has been installed, a shortcut
is placed on the Desktop and in the start folder:
Clicking the shortcut will start the application.
Se section ‘Upgrading prom previous versions’
for instructions in how to use the utilities.
SW6000 Migration Utility.lnk
SW6000 Migration 2 Utility.lnk
Installing the CP 6000 Chip Card Programmer
The CP 6000 Chip Card programmer is used for programming and reading DIC chip cards. To install the
programmer follow the instructions
1
Connect the programmer to an available USB
port on the PC, where a CAA application is
installed.
Your windows operating system will
automatically detect the CP 6000 by showing
the ‘Found New Hardware Wizard’.
Click ‘No, not this time’ to continue
2
Insert the SW 6000 v3.3.xx CD-Rom in the
CD drive
