56
7 Troubleshooting
7.3 Removing and cleaning the main brush
If the main brush needs advanced cleaning,
proceed as follows:
1.
Ensure that the appliance is switched off
(no LED is lit).
2.
Position the robot upside down.
3.
Unscrew the 3 screws as shown (Fig. 30).
4.
Remove the support brush.
5.
Remove the main brush as indicated
(Fig. 31).
6.
Clean main brush and support brush thor-
oughly of hairs and lint.
7.
Re-insert the main brush as indicated
(Fig. 32).
8.
Put the support brush back into place.
9.
Screw in the 3 screws (Fig. 33).
30
31
32
33
NOTE:
If necessary,
carefully
use scissors or
tweezers.
NOTE:
If the brush is excessively dirty, it might be
useful to replace it; see
Z
Chapter 7.2,
"Ordering accessories and spare parts"
.
Summary of Contents for M608 Navigator
Page 2: ...2 ...
