50
5 Use
5.6 Switching off
Go
A
24
HOUR
22
NOTE:
You can switch the robot off whenever you
want; just choose one of the following:
Press the "On/Off" key (
) on the ro-
bot shortly. This will stop the robot (it is
now in standby).
Press the "On/Off" key (
) on the ro-
bot for 1 second or longer. This will turn
the robot off.
Press the "
" key on the remote con-
trol. This will stop the robot (it is now in
standby).
Press the "
" key on the remote con-
trol for about 2 seconds. This will turn the
robot off.
Lift the robot. It will stop within 1 second.
NOTE:
If you lift the appliance while it is in opera-
tion, the motors will switch off automatically
after approx. 1 second without floor contact.
However, in this case the appliance is not
switched off (blue LED flashing slow, red
LED flashing fast). In this case switch off
your robot via the "On/Off" key (
) or the
"
" key on the remote control. The error
will be deleted. You can start your robot
again.
Summary of Contents for M608 Navigator
Page 2: ...2 ...
