44
3 Prior to first use
5.
Now charge your robot for approx. 4 to 5
hours, until
- a short tune is played and
- both LEDs turn off (Fig. 11).
3.5 Activating the remote control
1.
Remove the plastic film (Fig. 12) from the
remote control's battery compartment.
3.6 Inserting batteries into the light fence tower
1.
Open the battery compartment cover.
2.
Insert the 2 supplied batteries (type C,
1.5 V) as indicated (Fig. 13). Make sure
you position them correctly (Fig. 13).
11
NOTE:
When its battery capacity becomes low,
your robot automatically returns to the
docking station for charging. If it - for any
reason - does not succeed in docking onto
the docking station, you need to lift it manu-
ally onto the docking station, as described
above.
12
13
NOTE:
When changing batteries, be sure not to
mix batteries of different types or those that
are fully charged with those that are partly
charged.
Summary of Contents for M608 Navigator
Page 2: ...2 ...
