17
1-800-634-7328 DirectSupply.com
Maintenance and Inspection
Information
Wood veneer surfaces should be maintained by cleaning
with furniture polish or lemon oil. Laminate surfaces should
be maintained by cleaning with disinfectant spray.
Visually inspect bed and accessories for broken
welds or cracks, and check for loose hardware on a
monthly basis.
If any broken welds or cracks are found, remove
bed from use /service immediately and replace affected
part(s).
Visually inspect cable routing for pinched or
frayed cables.
Any loose hardware should be tightened.
If you require further assistance, contact Technical Support
at 1-800-634-7328.
End of Life Disposal
• Many components of this product may be recycled.
• Please dispose of non-recyclable items properly.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material
resources.
•
CAUTION:
Possible damage to electrical parts, and/or
shock hazard.
Clean all electrical components (actuators, control box,
pendant and cables) on your Direct Supply
®
bed with a
damp, well-wrung cloth. Excess water in or on electrical
parts can damage these components.
Do not submerge the pendant in liquid.
Your Direct Supply
®
bed has a durable, baked-on epoxy
finish, easily cleaned with mild solution of antiseptic
cleaner and warm water. Read and follow all label
instructions on cleaning products.
Other Suggested Cleaners
• 3% hypochlorite or equivalent
• Quaternary cleaners
(active ingredient - ammonium chloride)
• Phenolic cleaners
(active ingredient - o-phenyl phenol)
• Chlorinated bleach solution (5.25% - less than 1 part
bleached to 100 parts water)
Cleaning
