background image

3

1-800-634-7328    DirectSupply.com

 

WARNING: Possible Injury Or Death.

 This product is 

intended for use as an adjustable mattress support platform that 
contours for resident/patient comfort with adjustable height for 
resident/patient and caregiver convenience. Use of this product in 
a manner for which it was not designed could result in unproven 
or unsafe configuration, potentially resulting in injury or death.

 

WARNING: Possible Injury.

 Before adjusting bed, ensure 

that area under and near bed perimeter is free of people and 
obstructions. Failure to do so could result in injury or damage to 
the bed.

 

WARNING: Possible Injury.

 Keep bed in lowest position 

except when providing care (bathing, clothing changes, etc.). Bed 
should be at lowest convenient height for entry or exit. Failure to 
do so could result in injury.

 

WARNING: Possible Injury Or Death.

 Floor locks increase 

bed stability and resident/patient safety. Floor and caster swivel 
locks must be locked prior to any resident/patient transfer or 
resident/patient use of the bed. Failure to do so could result in 
injury or death.

 

WARNING: Possible Injury Or Death.

 Resident/patients 

may become entangled in pendant cord. Resident/patients with 
reduced mental acuity should not be allowed access to pendant. 
Unsupervised use of pendant could result in injury or death.

 

WARNING: Possible Injury Or Death.

 Bed safe working load 

is 450 pounds, evenly distributed. This is total weight counting 
resident/patient, mattress, bedding, and any other equipment 
or persons likely to be on bed. Do not exceed 450-pound safe 
working load. Exceeding the safe working load could result in 
property damage, injury or death.

 

WARNING: Possible Injury Or Death.

 Do not roll bed 

over abrupt thresholds with resident/patient in bed. Bed is not 
designed for transporting resident/patient. Transporting resident/
patient in the bed could result in injury or death.

 

WARNING: Possible Fire Hazard.

 Use nasal mask or ½ bed 

tent oxygen administering equipment. Oxygen tent should not 
extend below mattress support platform. Pendant should not be 
placed in an oxygen-enriched environment such as an oxygen 
tent. Use of electrical circuits in an oxygen-enriched environment 
could result in a fire hazard.

 

WARNING: Possible Shock Hazard.

 Unplug power cord from 

wall outlet before performing any maintenance, cleaning or service 
to the bed. Resident/patient should be removed from bed prior to 
any service being performed on the equipment. Place bed on its 
side versus working under it. Failure to do so could result in injury 
or death. 

Note:

 In case of unexpected movement, unplug bed from 

any outlet.

 

WARNING: Possible Shock Hazard.

 Position the bed in a 

manner that allows ease of access to the power cord and wall 
outlet. Injury may result from improper routing of the power cord. 
Always follow the proper factory-installed routing configuration. 
Failure to do so could result in injury or death.

 

WARNING:

 An optimal bed system assessment should be 

conducted on each resident/patient by a qualified clinician or medical 
provider to ensure maximum safety of the resident/patient. The 
assessment should be conducted within the context of, and in 
compliance with, the state and federal guidelines related to the use 
of restraints and bed system entrapment guidance, including the 
Clinical Guidance for the Assessment and Implementation of Side 
Rails published by the Hospital Bed Safety Workgroup of the U.S. 
Food and Drug Administration. Further information can be obtained 
at the following web address: http://www.fda.gov/MedicalDevices/
ProductsandMedicalProcedures/GeneralHospitalDevicesandSupplies/
HospitalBeds/default.htm.

Important Note: 

When using the mattress system, always 

ensure that the resident/patient is positioned properly within the 
confines of the bed. Do not let any extremities protrude over the 
side or between the bed assist devices when the mattress is 
being used.

 

WARNING: Possible Injury Or Death.

 Use a mattress 

that is properly sized to fit mattress support platform, that will 
remain centered on mattress support platform relative to State 
and Federal guidelines. Direct Supply recommends the use of a 
mattress with minimum dimensions of 35" width and 6" height. 
Length should match mattress support platform. Use of an 
improperly fitted mattress could result in injury or death. If using 
Comfort Extension, see Comfort Extension manual for proper 
mattress size.

 

WARNING: Possible Injury Or Death.

 If a resident/patient’s 

mental or physical condition could lead to resident/patient 
entrapment, the mattress support platform should be left in the 
flat position when unattended. Failure to do so could result in 
injury or death.

 

WARNING: Possible Injury Or Death.

 Use a properly sized 

mattress in order to minimize the gap between the side of the 
mattress and assist device. This gap must be small enough 
to prevent resident/patient from getting his/her head or neck 
caught in this location. Make sure that raising or lowering bed, or 
contouring the mattress support platform, does not create any 
hazardous gaps. Excessive gaps may result in injury or death. 

 

WARNING: Possible Injury Or Death.

 Locate mounting 

brackets for assist devices strictly according to instructions. Gap 
between head/foot panel and assist device must be small enough 
or large enough to prevent resident/patient from getting his/her 
head or neck caught in this location (see specific Assist Device 
Installation Instructions for more information). If multiple assist 
devices are used, position each so that gap between them is 
large enough for trunk and hips to pass through easily. Make sure 
raising or lowering bed, or contouring mattress support platform 
does not create any hazardous gaps. Failure to do so could 
result in injury or death. 

Important Note:

 Powered air mattress 

surfaces may pose a risk of entrapment. Prior to use, ensure the 
therapeutic benefits outweigh the risk of entrapment. 

 

WARNING: Possible Injury Or Death

. Do not use an assist 

device if any openings within assist device body allow resident/patient 
to get his/her head or neck lodged within these openings. Use of 
assist devices with large openings, may result in injury or death.

Important Precautions

 

Summary of Contents for Panacea 1000-FLEX BED

























Reviews: