9
1-800-634-7328 DirectSupply.com
Your Direct Supply Panacea 1000-FLEX bed comes with a
pendant (Figure 13).The pendant allows the patient/resident
to operate the bed.
•
WARNING: Possible Injury or Death.
This bed should
not be operated (control the movements of the bed
through the control interfaces) by persons who do not
have the cognitive skills to understand the information in
the owner’s manual or cannot understand and perform the
proper operation of the bed. This bed should not be used or
operated by children.
Staff Control Panel Operation (Optional)
The staff control panel (Figure 14) allows the caregivers
to operate the bed from the foot panel without walking to
the bedside. The caregiver can also individually lock out all
functions, both pendant and staff control.
1. To lock out a function, press “Lock” graphic on the
panel. Illuminated amber LED indicates that the
function is now locked out.
2. To unlock a function, press the “Unlock” graphic
on the panel. Amber LED is no longer illuminated,
signaling that the function is now operable. If unlock is
pressed all functions unlock, user may need to re-lock a
function, if desired.
•
CAUTION:
Be careful not to damage power cord when moving or placing bed. After placing bed in service, monitor
power cord positioning carefully to prevent damage as you fully operate all bed functions.
•
CAUTION:
When power cord is not plugged into a wall outlet, place it on sleep surface to prevent it from contacting
floor. This will help prevent cord damage when transporting bed.
•
CAUTION:
If a power cord is damaged, remove bed from service until repairs are performed.
•
WARNING: Possible Injury
. Before leaving the bed unattended, check that the casters in the locked position. Never
leave an unlocked bed unattended.
•
WARNING: Possible Injury.
Check that the casters are in the locked position before allowing the resident to enter or
exit the bed.
Pendant Operation
Back Operation
1. Push button to raise back
2. Push button to lower back
Knee Operation
3. Push button to raise knee
4. Push button to lower knee
Auto Contour Operation
5. Push button to raise
back and knee
6. Push button to lower
back and knee
Bed Height Operation
7. Push button to raise bed
8. Push button to lower bed
6
5
2
1
4
3
8
7
Figure 13
Figure 15
Roll in Low Lock System
1. To keep bed from rolling when in the lowest position,
press down on locking lever to lock casters (Figure 15).
2. Standard caster set comes with two locking casters
placed at opposing corners of bed.
Mobile
Position
Locked Position
Swivel Casters
Low
only
Any Height (casters must
be locked in Low)
Head & Foot (in
Low position only)
Staff Control Operation
Back Operation
1. Push to raise back
2. Push to lower back
Knee Operation
3. Push to raise knee
4. Push to lower knee
Auto Contour Operation
5. Push to raise back
and knee
6. Push to lower back
and knee
Bed Height Operation
7. Push to raise bed
8. Push to lower bed
Lock Operations
9. Push and hold to
change lockout status.
The Lock symbol will
be illuminated when a
function is locked.
10. Push to unlock
Figure 14
Operation
1
2
4
6
8
3
5
7
9
9
9
10
