Direct IP XR408, Operation Manual

Page: 43 / 86

Part 3 - Configuration
43
3
Pattern
Used to set up a pattern profile for the camera to
follow along.
• Start recording : Select a pattern number,
enter a name for the pattern, and then click OK
to save the pattern. Move the camera using
directional, zoom, and focus buttons and then
click
Stop recording to save the pattern profile.
You can record up to two minutes of movement.
- Directional Buttons ( ):
Used to tilt and pan the camera.
-
Zoom
( ): Zoom in and out.
- Focus ( ): Adjust camera focus to far
or near.
- Speed : Specify the camera's panning and
tilting speed.
•
Test
: Select a pattern profile and then click Test
to test it.
• Edit : Used to edit the selected pattern profile.
• Remove : Used to remove the selected pattern
profile.
4
Tour
Used to set up a tour profile of multiple functions in
a designated sequence.
• Set : Used to set up a tour profile.
-
Name
: Enter a name for the tour profile.
- No. : Indicates the order of the function in the
tour sequence.
- Dwell Time (sec.) : Specify how long to
perform the selected function for.
-
Speed
: Specify the preset speed.
• Test : Select a tour profile and then click Test to
test it.
• Edit : Used to edit the selected tour profile.
•
Remove
: Used to remove the selected tour
profile.
Select Apply after setting up a preset, scan,
pattern, or tour profile to see images from the
concerned camera on the left side of the screen.
Selecting
Apply or OK displays a popup screen
that indicates whether the profile has been set
up successfully.
5
Home Position : Specify the camera's home
position.
• Default : Uses the factory-default position as the
camera's home position.
• Custom : Uses the user-defined position as the
home position.
• Select
Set
to change the home position.