Direct IP XR408, Operation Manual

Page: 30 / 86

Part 2 - Getting Started
30
PTZ Control
While in Live mode, right-click and select PTZ from
the context menu or press the
PTZ button on the
NVR's front panel or remote control to display the PTZ
camera selection window.
Select the camera you wish to control. The icon
will begin to flash on the selected camera's OSD
window.
Use the
Arrow buttons to pan and tilt the camera up,
down, left, and right.
Use the
1
2
3
4
5
6
and
1
2
3
4
5
6
buttons to zoom in/out.
Use the
1
2
3
4
5
6
and
1
2
3
4
5
6
buttons to shift focus from
nearby to far and vice versa.
Use the
1
2
3
4
5
6
button to load the preset window.
Use the
1
2
3
4
5
6
button to save current position as a
preset.
You can also change the direction by dragging on the
mouse.
Also, it's possible to use the mouse wheel to zoom in/
out.
• Logging in with an account that has PTZ Control
Authority is necessary in order to control PTZ
cameras.
• A message will prompt if there is no PTZ camera
displayed on the Live screen.
• Zoom in/out and shift focus using the PTZ Control
( ZOOM , FOCUS ) buttons on the remote control.
• To exit PTZ mode, press the PTZ button again.
Setting Up a PTZ Preset
While in PTZ mode, select the VIEW button on the
remote control to display the Set Preset window and
assign the current position as a preset.
While in PTZ mode, select the SAVE button on
the remote control to display the Move to Preset
window. Select a preset to move the current PTZ
camera to the selected preset's position.