Dionex UltiMate 3000 Series, Operating Instructions Manual

Page: 51 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Operating Instructions Page 37
Under PumpModule , the following commands and properties are displayed, for
example, in the Commands dialog box (

page 65):

General pump properties and commands, such as, Connect, Connected,
Disconnected, and Degasser.

Specific groups of pump properties and commands, such as Pump or PumpLeft
and PumpRight (see table further down in this section), with the flow-related
properties and commands.

Degasser Control
Indicates whether the vacuum degasser in an LPG-3400 or in an SRD-3x00 Solvent
Rack can be operated and monitored. If it can, the related commands and properties
are available, for example, in the Commands dialog box.

Click Internal if the pump is an LPG-3400.

Click External if an SRD-3x00 Solvent Rack is connected to the pump.

In all other cases, click None .

Depending on the pump type
Pump Device or Left Pump Device and Right Pump Device (DGP-3600)

Name
The following names are the default names:
Pump Default Name
Pump
Device Name Left Pump
Device Name Right Pump
Device Name
ISO-3100
HPG-3x00
LPG-3400 Pump n.A. n.A.
DGP-3600 n.A. PumpLeft PumpRight
Under this name, specific groups of properties and commands are listed in the
Commands dialog box, for example, the flow-related properties and commands of the
pump. There you can set, for example, the flow rate and the partial flows and change
the upper and lower pressure limits.
To control the pump with the existing control panels, accept the default name. If you
enter different names, you may have to re-link the controls on the control panels and
edit the name in the program files.