Dinolift 240RXT, Operating Instructions Manual

Page: 79 / 113

DINO 240RXT
79
20.5 CHASSIS CONTROL CENTRE (AK)
F7:
Outriggers, feed to XP-A1- module (10 A).
F14:
Outriggers, feed to XP-A1- module (10 A).
K30:
Control relay. Control relay for the outrigger 1, upwards.
K31:
Control relay. Control relay for the outrigger 1, downwards.
K32:
Control relay. Control relay for the outrigger 2, upwards.
K33:
Control relay. Control relay for the outrigger 2, downwards.
K34:
Control relay. Control relay for the outrigger 3, upwards.
K35:
Control relay. Control relay for the outrigger 3, downwards.
K36:
Control relay. Control relay for the outrigger 4, upwards.
K37:
Control relay. Control relay for the outrigger 4, downwards.
K38:
Control relay. Release of the brakes on the drive motors, operates during the execution of the
driving or turning movements.
K39:
Control relay. Control of the outrigger selector valve, is active during the operation of the
outriggers.
K43:
Control relay for automatic levelling. Sets off the automatic levelling.
K44:
Control relay for automatic levelling. Sets off the simultaneous lifting of the outriggers.
S32:
Emergency descent button. Starts the emergency descent unit for operation of support outriggers
(the mains current of the lift must be switched on).
XP-A1:
Power supply unit.
Bus module used for controlling the propo valves and relays and as a connection terminal for the
sensors.