【
6-15
】
ENGINE
●
Remove the gearshift fork shaft.
●
Remove the gearshift forks [4].
●
Remove the gearshift cam drum [5].
●
Remove the seminal gear [6].
●
Remove the countershaft assembly [7].
●
Remove the input main shaft [8].
●
Remove the final shaft T/M assembly [9].
●
Remove the crank balance shafts [1].
INSPECTION
CAMSHAFT AND CYLINDER HEAD
Camshaft
Visual Checking
●
Check for ware and damage on Cam Sprocket gear teeth.
●
Check for ware and damage on decompression related parts.
●
Check if decompression would be operated smoothly.
●
If any parts would be damaged or worn, replace with new
Camshaft Assy.
Camheight
●
Check for damage and ware on cam profile portion.
●
Measure the height of cam profile.
Service Limit of cam profile height
IN 36.150
mm
EX 35.100
mm
NOTE
Identify the original position of disassembled parts, with marking as
necessary. Place them in order on the clean table.
It is important that buckets are place back in original hole.
CAUTION
Do not attempt to disassemble the camshaft. It is not serviceable.
Summary of Contents for DL702
Page 1: ... 0 0 FOREWORD INDEX ...
Page 88: ... 7 13 ELECTRICAL SYSTEM Wiring Diagram ...
Page 89: ... 7 14 ELECTRICAL SYSTEM Wiring Diagram ...
Page 90: ... 7 15 ELECTRICAL SYSTEM NOTE ...
