【
6-7
】
ENGINE
●
Turn the crankshaft to bring the “TDC” line [A] on the starter clutch
to the index mark [B] of the crankcase.
●
Remove the camshaft cover bolts [1] and camshaft cover.
●
Remove the pins and camshafts.
●
Remove the cam chain tensioner bolt [1].
●
Remove the cam chain tensioner [2].
NOTE
At the above condition, the piston is at TDC of compression
stroke and also the engraved marks [C] on the camshafts are
parallel with the mating surface of the cylinder head cover.
CAUTION
Be sure to loosen the camshaft cover bolts evenly by shifting the
wrench diagonally.
NOTE
Be careful not to drop the pins into the crankcase.
Summary of Contents for DL702
Page 1: ... 0 0 FOREWORD INDEX ...
Page 88: ... 7 13 ELECTRICAL SYSTEM Wiring Diagram ...
Page 89: ... 7 14 ELECTRICAL SYSTEM Wiring Diagram ...
Page 90: ... 7 15 ELECTRICAL SYSTEM NOTE ...
